Phau Ntawv Qhia

WARNING
This luminaire must be disconnected from the circuit if subjected to any high voltage or insulation resistance
testing. Irreparable damage will occur if this instruction is not followed.
This product is not suitable for direct installation in the ground, nor in a retaining wall where the ground may
become saturated behind.
This product is not suitable for installation in or near a coastal or marine environment.
•
•
•
•
•
•
Fig. 1
• Insert the sleeve into the cut-out and cement in place
• Connect the luminaire to the mains supply ensuring the correct polarity is observed: L - Live (brown),
N - Neutral (blue)
• Insert the body of the luminaire into the sleeve by pressing on the side blades
• Switch on and check for correct operation