INSTALLATION & MAINTENANCE MANUAL NH019W / NH020W / NH020B
GENERAL INSTRUCTIONS These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following products: NH019W / NH020W / NH020B SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations.
• Fig. 1 • Insert the sleeve into the cut-out and cement in place • Connect the luminaire to the mains supply ensuring the correct polarity is observed: L - Live (brown), • • N - Neutral (blue) • Insert the body of the luminaire into the sleeve by pressing on the side blades • Switch on and check for correct operation • • WARNING This luminaire must be disconnected from the circuit if subjected to any high voltage or insulation resistance testing.
GENERAL The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire should be replaced. Clean the external surfaces with a damp cloth using a mild solution of detergent and warm water only, do not use aggressive cleaning products or solvents which may damage the product. Do not use any source of high-pressure washers to maintain or clean this luminaire. This product is non-dimmable.
INTERNATIONAL CONTACT DETAILS 02 ML Accessories Limited LU5 4LT www.mlaccessories.co.
