Instruction Manual

WARNING
This luminaire must be disconnected from the circuit if subjected to any high voltage or insulation resistance
testing. Irreparable damage will occur if this instruction is not followed.
This product is not suitable for installation in or near a coastal or marine environment.
•Feed the mains cable through the rubber grommet to retain IP rating, and secure the backplate to the surface
• Connect the luminaire to the mains supply ensuring the correct polarity is observed (see Fig. 1):
L – Live (brown), N – Neutral (blue)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Fig. 1
• Replace the backplate ensuring the gasket is in place and not damaged
• Secure the luminaire to the mounting bracket
• Switch on and check for correct operation