INSTALLATION & MAINTENANCE MANUAL LWR2G / LWR2W / LWR4G / LWR4W LWS2G / LWS2W / LWS4G LWS4W
GENERAL INSTRUCTIONS These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following products: LWR2G / LWR2W / LWR4G / LWR4W / LWS2G / LWS2W / LWS4G / LWS4W SAFETY •This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations.
•Feed the mains cable through the rubber grommet to retain IP rating, and secure the backplate to the surface • Connect the luminaire to the mains supply ensuring the correct polarity is observed (see Fig. 1): L – Live (brown), N – Neutral (blue) Fig.
GENERAL This product contains a light source of energy efficiency class G to Regulation (EU) No 2019/2015 and (UK) 2021 No. 1095. This product contains an LED light source and a control gear which can be replaced by a professional. Clean the external surfaces with a damp cloth using a mild solution of detergent and warm water only, do not use aggressive cleaning products or solvents which may damage the product. Do not use any source of high-pressure washers to maintain or clean this luminaire.
INTERNATIONAL CONTACT DETAILS -20°C ~45°C TA 02 ML Accessories Limited LU5 4LT www.mlaccessories.co.
