INSTALLATION & MAINTENANCE MANUAL GUSPIKER / GUSPIKES
GENERAL INSTRUCTIONS These instructions should be read carefully and retained by the end-user after installation for future reference and maintenance. These instructions should be used to aid the installation of the following products: GUSPIKER / GUSPIKES SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations.
• Fig. 1 • • • The body of the product should not rest directly on the ground • The preinstalled cable supplied is for above-ground use only. Cables that are to be routed within walls or below ground must be protected by means of suitable conduit or trunking (see Fig. 2) Fig.
• For wall mounting, using the bracket as a template, mark the location for, and drill the fixing holes ensuring not to infringe with any gas/water pipes or electrical cables (see Fig. 3). Fix the bracket to the surface using • suitable fixings (not included) Fig. 3 • • • • Connect the luminaire to the mains supply ensuring the correct polarity is observed: Live (brown), Earth • • • Insert a suitable GU10 lamp (max.
WARNING This product is not suitable for installation in or near a coastal or marine environment. GENERAL Clean the external surfaces with a damp cloth using a mild solution of detergent and warm water only, do not use aggressive cleaning products or solvents which may damage the product. Do not use any source of high-pressure washers to maintain or clean this product. This product is dimmable dependant on lamp type. This product should be recycled in the correct manner when it reaches the end of its life.
INTERNATIONAL CONTACT DETAILS 130 ML Accessories Limited LU5 4LT www.mlaccessories.co.
