INSTALLATION & MAINTENANCE MANUAL 12DC40 / 24DC40
GENERAL INSTRUCTIONS These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following products: 12DC40 / 24DC40 SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations.
• • • • • • INSTALLATION • Provide power to the required point of installation • • • • The driver can be fixed to a solid surface (if required) by using the fixing points shown below • Unscrew the terminal cover screws (see Fig. 1) and remove the terminal covers Fig.
WARNING This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance testing. Irreparable damage will occur if this instruction is not followed. GENERAL This product should be recycled in the correct manner when it reaches the end of its life. Check local authorities for where facilities exist. Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage the product.
INTERNATIONAL CONTACT DETAILS 59 ML Accessories Limited LU5 4LT www.mlaccessories.co.
