Manual

Knight Rolling Block (KRB7)
Action and Safety Systems
Rolling Block Action and Hammer Spur Safety
The rolling block action can be opened to install and remove primers�
The hammer spur safety provides protection from accidental discharge by changing the
shape of the hammer nose so as to allow or not allow contact with the firing pin� This
is achieved by pivoting the hammer spur downward to the safe position any time the
hammer is cocked or de-cocked� When the rear of the spur is pushed down the forward
portion of the hammer nose is rotated upward, preventing contact with the firing pin� For
the rifle to fire, the spur must be moved to the raised position before the trigger is pulled�
Safe
Fire
If for any reason the hammer spur does not pivot into either position with a positive
click, or fails to move to the down (safe) position any time the hammer is cocked or de-
cocked, immediately discontinue use of your rifle� Report this immediately to Knight
Rifles warranty and customer service department at [phone]�
44