Manual

Safety System
The Knight Revolution has only one safety system, a cross-bolt safety system� To lock
the trigger, push the safety to the right� Push the safety to the left, to put the rifle in
the fire position�
Fire Safe
Disassembly and Assembly
WARNING
!
Be sure rifle is not loaded or primed before disassembly or assembly.
Study the rifle schematic and acquaint yourself with the different parts and terminology
of your muzzleloader before assembling or disassembling� Letters and numbers in paren-
theses refer to labels on each rifle schematic for each model�
It is advisable to use a padded vise to remove and reinstall the breech plug� Place small
parts in a pan to avoid losing them�
Disassembly
1� Remove the trigger carriage� Press the release button, found just behind the trigger
guard (Photo #1 - Letter A), and the drop action will drop down� Hold the latch
open (found in front of the trigger guard) (Photo #2 - Letter B), swing the action
away from the rifle, and pull it out of the receiver�
1.
A
B
2.
24
Knight Revolution™ .45, .50, .52