Manual

Adjustments

Trigger Adjustment

WARNING

All trigger and sear adjustments must be made by the factory or a certified gunsmith

only. Incorrect adjustments can increase the risk of accidental discharge.

Do not reduce trigger pull to less than three pounds, as this increases the risk of an

accidental discharge. Creation of a lower trigger pull is an unauthorized alteration

and is a misuse of the product.

Bighorn, Wolverine, TK2000, DISC Extreme & Long Range Hunter

The DISC Extreme, Knight Bighorn, Wolverine, and TK2000 have crisp adjustable trig-

gers that have been set at the factory for a clean release at approximately three pounds�

Trigger pull can be adjusted up to four pounds�

Knight Vision and Knight Revolution

The Knight Vision and Knight Revolution triggers are not adjustable�

Knight Rolling Block (KRB7)

The Knght Rolling Block trigger is adjustable for pull weight only�

Sighting In

To shoot your rifle accurately, your rifle needs to be sighted in for your personal sight pic-

ture� Follow the loading procedures on page 7 to sight your rifle accurately� Before load-

ing and firing, be sure to read "General Loading and Firing" on page 7 and the section

related to your particular model�

We recommend beginning "sight-in" at 50 yards, maintaining a point of impact 2" above

the center of the bullseye� Then move to 100 yards for your final sight-in�

Your rifle's sights can be adjusted by moving the rear sight� To make your rifle shoot

higher, move the rear sight higher� To make your rifle shoot lower, move the rear sight

lower� When you want to move the impact of the projectile to the right, move the rear

blade to the right� Regardless of the sight you have or its method of adjustment, move

the rear sight in the direction you wish the impact of the projectile to move� Do not over

tighten your sight screws�

All Knight® Rifles are drilled and tapped for easy mounting of scope rings and bases�

When sighting in a scope, follow the manufacturer's directions� Scope mounts are recom-

mended by rifle model�

Williams Sight