Manual

11
Reloading
1� Return all safeties to the safe position�
2� Remove live or spent percussion caps and primers from your firearm�
3� Leave the action open during swabbing and loading (except break open actions which
should remain closed�)
4� Place the butt of the rifle on the ground�
5� Screw the cleaning jag onto the ramrod�
6� Moisten the cleaning patch with Knight Easy Clean and wring any excess out with
your fingers�
7� Using short, quick strokes with your ramrod and cleaning jag, swab the entire bore
several passes with the wet patch until it makes contact with the breech plug� Remove
and discard the soiled patch�
8� Place a dry patch on the jag and swab the entire barrel again, making sure to contact
the breech plug�
This process will ensure better shot to shot accuracy.
WARNING
!
Failure to swab the bore as instructed before reloading may leave hot
residue in the bore which could result in an accidental discharge during loading.
WARNING
!
There are many black powder substitutes available. Read and follow
all instructions and warnings provided by the manufacturer of the propellant you
choose.