Manual

26
straight back (as shown in photo #5).
Photo #5
7. Turn the rifle slightly to its side and by using the flat head of the extractor pushing
the pivot pin through the receiver and weld lug until the barrel is free (as shown in
photos #6 and #7). It is important that you balance the barrel and receiver to prevent
the barrel from dropping or falling out of your hands. Set the barrel, pivot pin and
extractor aside.
Photo #6 Photo #7
Firing Pin and Trigger Disassembly
1. Turning the receiver and butt stock slightly on its side, locate the trigger group release
lever (as shown in photo #8). While gripping the trigger group, push the release lever
forward and hold. With a slight rocking motion, remove the trigger group by pulling
it out and away from the receiver (as shown in photo #9). Set the trigger group aside.
Disassembly and Assembly (Centerfire and Rimfire)
Photo #8 Photo #9