Manual

20
WARNING
!
Be sure the rifle is not loaded or primed before disassembly or assembly.
Always check the breech plug for the presence of a priming device. Using the ramrod,
ensure that there is no projectile or powder charge loaded.
Study the rifle schematic and acquaint yourself with the different parts and terminology
of your rifle before assembling or disassembling. Letters and numbers in parentheses refer
to labels on each rifle schematic for each model.
It is advisable to use a padded vise to remove and reinstall the breech plug. Place small
parts in a pan to avoid losing them.
Disassembly
Barrel Removal
1. Point the firearm in a safe direction.
2. Check and ensure that the decocking safety device is set to safe and the hammer is
uncocked.
3. Visually inspect that the rifle is not loaded by opening the breech (see photos #3 and
#4). Close the breech.
4. Remove the ramrod and set aside.
5. Remove the forearm by pushing back on the forearm release button (as shown in
photo #1). Pull downward on the front of the forearm until it releases itself completely
from the rifle (as shown in photo #2). Set aside.
Photo #1 Photo #2
6. Compress the breach lock release button until you feel that the action is free to open
(as shown in photo #3). Open the action by holding onto the receiver and stock and
gently pulling downward on the front of the barrel (as shown in photo #4).
Photo #3 Photo #4
Disassembly and Assembly (Muzzleloader)