Manual

14
Loading and Firing (Muzzleloading)
8. Place a dry patch on the jag and swab the entire barrel again, making sure to contact
the breech plug.
This process will ensure better shot to shot accuracy.
WARNING
!
Failure to swab the bore as instructed before reloading may leave hot
residue in the bore which could result in an accidental discharge during loading.
WARNING
!
There are many black powder substitutes available. Read and follow
all instructions and warnings provided by the manufacturer of the propellant you
choose.
Loading and Firing (Centerfire and Rimfire)
1. Confirm that the hammer is not cocked and the decocking safety device is function-
ing properly and is in the safe position.
2. Be sure the rifle is pointed in a safe direction. Press the breach lock release button
(see photo #1) and open the break action (see photo #2).
Photo #1 Photo #2
3. Check the barrel for any obstructions.
WARNING
!
An obstructed barrel may cause
the rifle to explode when you shoot.
Loading
WARNING
!
Only use factory-loaded cartridges with this rifle. Never use reloaded
cartridges. Using reloaded cartridges could cause your rifle to explode.
1. Insert a cartridge and ensure it is seated on the extractor. Close the rifle.
WARNING
!
Your rifle is now armed. Do not point your rifle at anything that you
do not want to shoot.