Specification

ManualsBrandsKnauf Insulation ManualsAcoustic PanelsPerformance+ Acoustic Panel Sound Absorbing Beige Fabric Square 24 in. x 24 in.

This report contains seven (7) pages. Any additions to, alterations of, or unauthorized

use of excerpts from this report are expressly forbidden.

USG Corporate Innovation Center, 700 N. Highway 45, Libertyville, IL 60048

Page 1 of 7

Corporate Innovation Center

Construction Systems Lab

700 North Highway 45

Libertyville, IL 60048

USG Testing Services

TEST REPORT

ASTM C423-17

Standard Test Method for Sound Absorption and

Sound Absorption Coefficients by the Reverberation Method

Prepared for:

Project No:

USGTS-KINAXX

Will Zhou

Report No:

NRC -220302

1 Knauf Drive

Date Submitted:

3/04/2022

Shelbyville, IN 46176

Date Tested:

3/04/2022

Attn: Director, Product

Innovation

Introduction

This document contains ASTM C423-17 test results of KINA Acoustical Panels.

Prepared By:

Authorized By:

David Moyer

Principal Researcher

James Ullett

Program Manager

Innovation Services

Summary of Results

Summary of Test Results

Test Number

Specimen

NRC

NRC-220302

KINA red low density wall panels

0.85

Summary of content (7 pages)

PAGE 1
Corporate Innovation Center Construction Systems Lab 700 North Highway 45 Libertyville, IL 60048 USG Testing Services TEST REPORT ASTM C423-17 Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Method Prepared for: Will Zhou 1 Knauf Drive Shelbyville, IN 46176 Project No: Report No: Date Submitted: Date Tested: USGTS-KINAXX NRC -220302 3/04/2022 3/04/2022 Attn: Director, Product Innovation Introduction This document contains ASTM C423-17 test results of K
PAGE 2
1. TITLE ASTM C423-17 Sound Absorption and Sound Absorption Coefficients by the Reverberation Method testing of KINA Acoustical Panels. 2. OBJECTIVE To determine the Noise Reduction Coefficient (NRC) and the frequency specific Sound Absorption Coefficients of KINA red low density wall panels. 3. TESTED FOR Knauf Insulation North America 1 Knauf Drive Shelbyville, IN 46176 4.
PAGE 3
8. TEST SPECIMEN The test specimen was designated by the client as KINA red low density wall panel. The test specimen consisted of sixteen (16) full size panels each measuring 31.8 mm (1 1/4 in.) thick by 610 mm (24 in.) wide by 610 (24 in.) long panels to complete the test area. The panels consisted of fiberglass insulation core and a fabric face wrapped about sides to the back of the panel. The panel had square edges and were butted together to form the specimen. Total weight of the specimen was 17.
PAGE 4
14. CONCLUSION Based on the data obtained from this test, an NRC of 0.85 can be obtained from a ceiling system per Section 8 of this report. 15. TEST DATA Test data has been attached to this report in the form of an appendix. This report contains seven (7) pages. Any additions to, alterations of, or unauthorized use of excerpts from this report are expressly forbidden. USG Corporate Innovation Center, 700 N.
PAGE 5
This report contains seven (7) pages. Any additions to, alterations of, or unauthorized use of excerpts from this report are expressly forbidden. USG Corporate Innovation Center, 700 N.
PAGE 6
This report contains seven (7) pages. Any additions to, alterations of, or unauthorized use of excerpts from this report are expressly forbidden. USG Corporate Innovation Center, 700 N.
PAGE 7
This report contains seven (7) pages. Any additions to, alterations of, or unauthorized use of excerpts from this report are expressly forbidden. USG Corporate Innovation Center, 700 N.