Specification
Heavy-Duty
200 lb. Load Class
3/4" Side Clearance
Max. Drawer Width: 42"
8810 Heavy-Duty
Full Extension Drawer Slide
The 8810 Heavy-Duty Full Extension Drawer Slide is designed to accommodate wider and
heavier drawers for today’s challenging applications in the commercial, residential and
educational markets.
Applications
• Wood residential, commercial and office furniture
• Architectural, laboratory and school casework
• Store fixtures, medical carts
• Residential kitchen cabinetry
Specifications
Model: 8810 Heavy-Duty Full Extension Drawer Slide
Mounting: Side
Disconnect: Butterfly Lever Release
Hole Pattern: 32mm and Traditional
Face Frame Mounting: Slide must be blocked out. See Face Frame diagram. Do not
use rear bracket.
Type: Ball-Bearing, Telescopic
Travel: Full Extension
Finish: Zinc Plated
Length: 10", 12", 14", 16", 18", 20", 22", 24", 26", 28"
Clearance: .75" +.03" - 0" on each side
Height: 2.09" [53mm]
Packaging: Bulk Pack (8810B): all sizes - 4 pair per carton
Slide Configuration: Unhanded
Rating
Load: 200 lb.
Max. Drawer Width: 42"
Flat Load Rating: 100 lb.- load rating based on an 18" slide mounted in a 24" wide drawer
cycled 10,000 times.
As with all Knape & Vogt drawer slides, the 8810 is designed to meet or exceed
ANSI performance standards established by BIFMA, BHMA and KCMA.
Hardware
#8 or #10 x 5/8" Phillips Flathead
Warranty
Limited Lifetime Warranty
Profile Clearance
3/4" + 1/32" - 0"
.75" + .03" - 0"
19.1mm + .8mm - 0mm
.75"
[19.1 mm]
2.09"
[53 mm]