Specification

The Knape & Vogt 6400 Stainless Steel Full-

extension Drawer Slide is designed for use in

watercraft, wash-down environments, and near

coastal environments. Manufactured from 304

series grade stainless steel, the 6400 supports loads

in the 75 pound class. The 6400 is a full extension

slide with stock lengths from 16 to 22 inches. As

with all Knape & Vogt drawer slides, the 6400

meets or exceeds ANSI performance standards as

established by BIFMA, BHMA, and KCMA.

• Manufactured with 304 series grade

stainless steel

• USDA H-1 approved grease for use

in food preparation areas

• 75-Lb. Class rated for medium duty

applications

• Non-handed design for simple

installation

• Stainless steel mounting hardware

included

• Backed by the exclusive Knape &

Vogt Limited Lifetime Warranty

K E Y P R O D U C T F E A T U R E S

MEDIUM DUTY

75 lb. class

corrosion-resistant

KV 6400

Stainless Steel Drawer Slide

Knape & Vogt

, 2700 Oak Industrial Drive NE, Grand Rapids, MI USA 49505 | P 616.459.3311 | 800.253.1561 | F 616.459.3290 | www.kv.com

PAGE 1
Medium Duty KV 6400 Stainless Steel Drawer Slide 75 lb. class corrosion-resistant The Knape & Vogt 6400 Stainless Steel Fullextension Drawer Slide is designed for use in watercraft, wash-down environments, and near coastal environments. Manufactured from 304 series grade stainless steel, the 6400 supports loads in the 75 pound class. The 6400 is a full extension slide with stock lengths from 16 to 22 inches.
PAGE 2
6 4 0 0 T e c h n i cal Side Profile i n f o r m at i o n S p e c i f i c at i o n s 1.77 [45.0MM] 6400 Stainless Steel Drawer Slide height: mounting: 1.77” Side clearance: .51” + .030, minus 0 each side hardware: (16) #7x1/2” Stainless Steel Pan Head Screws .