Installation Sheet

Product: GS4260 Push-Open Drawer Slide
Mounting: Side
Clearance: 1/2" [12.7mm +.8mm minus 0]
Load Class: 100 lb.
Height: 1.79" [45.5mm (±0.3)]
Finish: Zinc Plated
Action: Full Extension (sizes: 12"–28")
Sizes: 10" [250mm], 12" [300mm],
14" [350mm], 16" [400mm],
18" [450mm], 20" [500mm],
22" [550mm], 24" [600mm],
26" [650mm], 28" [700mm]
Max. Recommended
Drawer Width: 24"
Packaging: 10 Pair and 1 set of instructions per box
Mounting hardware not included
Slides are unhanded
Optional GS4340 RB Metal Rear Bracket
Brackets: Packed 200 pieces per box
Part Number Size Slide Length Slide Travel A B C D E F G H I
GS4260 10
10" 250mm [9.84"] 238mm [9.37"] — — — — — 156mm [6.14"] — — —
GS4260 12
12" 300mm [11.8"] 305mm [12.00"] — — — — — 200mm [7.87"] — — —
GS4260 14
14" 350mm [13.78"] 356mm [14.0"] 96mm [3.78"] — — — — 256mm [10.08"] 192mm [7.56"] — —
GS4260 16
16" 400mm [15.75"] 406mm [15.98"] 128mm [5.04"] — — — — 294mm [11.57"] 224mm [8.82"] — —
GS4260 18
18" 450mm [17.72"] 457mm [17.99"] 96mm [3.78"] 160mm [6.29"] — — — 344mm [13.54"] 288mm [11.34"] — —
GS4260 20
20" 500mm [19.69"] 508mm [20.00"] 96mm [3.78"] 160mm [6.29"] 352mm [13.86"] — — 394mm [15.51"] 224mm [8.82"] 352mm [13.86"] —
GS4260 22
22" 550mm [21.65"] 559mm [22.00"] 128mm [5.04"] 192mm [7.56"] 384mm [15.11"] — — 444mm [17.48"] 224mm [8.82"] 352mm [13.86"] —
GS4260 24
24" 600mm [23.62"] 610mm [24.00"] 128mm [5.04"] 224mm [8.82"] 416mm [16.38"] — — 494mm [19.45"] 224mm [8.82"] 352mm [13.86"] 448mm [17.64"]
GS4260 26
26" 650mm [25.59"] 660mm [25.79"] 128mm [5.04"] 224mm [8.82"] 416mm [16.38"] 480 mm [18.90"] — 544mm [21.42"] 224mm [8.82"] 352mm [13.86"] 480mm [18.90"]
GS4260 28
28" 700mm [27.55"] 711mm [27.99"] 128mm [5.04"] 224mm [8.82"] 288mm [11.33"] 480mm [18.90"] 544mm [21.42"] 594mm [23.39"] 224mm [8.82"] 352mm [13.86"] 544mm [21.42"]
9mm
[.35 in]
TYP
35mm
[1.38"]
A
B
C
D
Slide Travel
4.4mm [.17"] x 6.1mm [.24 in] TYP
12mm [.47"]
8.5mm [.33"]
9mm [.35"]
21.6mm [.85"]
34.3mm [1.35"]
10":
106mm [4.17"]
12-28":
128mm [5.03"]
36mm
[1.42"]
G
Slide Length
21.6mm [.85"] TYP
9mm [.35"] TYP
4.6mm [.18"] TYP
6.4mm [.25"] TYP
4.6mm [.18"] x 9.5mm [.37"] TYP
310227 B 0516
E
F
H
I
Inset Drawer
Push in 2 mm and release to activate
push-to-open mechanism.
4mm ± .5
Overlay Drawer
Allow a minimum of 4mm ±.5mm
clearance between drawer front and
cabinet to provide enough space to
activate push-to-open mechanism.
1/8”
3.54"
[90 mm]
1.08" [27.2mm]
GS4340 RB Metal Rear Bracket
1.89"
[48.1mm]
1/2"
[12.7mm]
1.79"
[45.5mm ±
0.3]
Profile
GS4260 Push-Open Drawer Slide
4260 Series
Manufactured by Knape & Vogt Asia / Taipei, Tawain. Distributed by Knape & Vogt Manufacturing Company.
2700 Oak Industrial Drive NE Grand Rapids, MI 49505 USA | 800.253.1561 | 616.459.3311 | fax [phone] | www.kv.com
4.4mm [.17"] TYP