Specification Sheet

OL2230/1016
880 Series Extra-Duty Oval Closet Rod
1. Product Name
880 Series Heavy-Duty Oval Closet Rod.
For closet or other storage applications requiring oval closet rods.
2. Manufacturer
Knape & Vogt
®
Manufacturing Company
2700OakIndustrialDr.NE,GrandRapids,MIUSA49505-6026
616.459.3311 | www.kv.com
3. Product Description
Basic Use: 880 Series Heavy-Duty Oval Tubing are manufactured for closet or other
storage applications requiring closet rod support.
Composition and Materials: Steel
Sizes:
Outside Diameter:30mmtallx15mmwide
Wall Thickness: 1.2mm
Lengths: 96" and 144"
Finishes: Chrome (CHR)
4. Technical Data
Applicable Standards: ClosetRodsaretestedtomeetorexceedANSIperformance
standards as established by BHMA in the Knape & Vogt (KV) recommended application.
These load limits are intended to be used as general guidelines only, and no warranty —
expressedorimplied—ismadebyKnape&Vogt.
Results were obtained by laboratory testing in accordance with ANSI/ BHMA A156.9-2003
performance standard.
Representative testing in a fully configured application is the only way to assure proper
performance, durability, and safety.
The aforementioned load limit is intended as a guide only and not as a warranty. Actual
load bearing capabilities depend upon the type of cabinet/wall material and use of
appropriate mounting fasteners, installation technique, and construction.
Environmental Considerations:
Environment: Excessivehumidity,salts,orotherchemicalagentscancorrodethe
finish and attack metal or plastic components.
Fastening: Inadequate or incorrect fasteners can result in the flanges and rods
pulling loose and causing damage.
Alignment: Improper closet rod alignment can result in a system that is ineffective
and unsafe.
5. Installation
Formaximumloadingcapacity,angesandclosetrodshouldbemountedintostudsora
solid frame. Mark installation locations of flanges and secure them to studs or solid frame.
Install closet rod into flanges. Always install additional supports in center of application if
closet rod is 5 feet, or 32" intervals into wall studs if longer than 5 feet.
6. Availability and Cost
Availability: Knape & Vogt (KV) products are available from stocking distributors and
through KV Representatives worldwide.
Cost: Current pricing is available from area KV Representatives. Please call for the nearest
representative at: 1.800.253.1561.
7. Warranty
Limited Lifetime Warranty: Knape & Vogt offers its standard Limited Lifetime Warranty
to the initial purchaser of commercial products. This warranty covers defects in materials
and workmanship which occur during normal use, and the remedy is limited to repair or
replacement of defective products, at KV's option. Certain types of defects and damage
areexcludedfromwarrantycoverage,costsandexpensesarenotcovered,andadditional
restrictions apply. A copy of the Limited Lifetime Warranty, with all warranty details,
limitations and disclaimers, is available on the Customer Care Connection location at
www.kv.comorfromKVCustomerService,2700OakIndustrialDrive,GrandRapids,
MI 49505, 1.800.253.1561.
8. Maintenance
880 Series Heavy-Duty Oval Closet Rods require no maintenance. Inspect for proper fit
periodically and adjust when necessary. Replace as required or recommended by application.
8. Technical Services
Knape & Vogt and area represen tatives can assist with any application. For further
information, or for the name of the representative nearest you, please call Knape & Vogt
Customer Service: 1.800.253.1561 or visit our website at: www.kv.com.
10. Filing Systems
Additional product information, data sheets, application sheets, and a full catalog are
available upon request from Knape & Vogt.
This and other KV literature is available for download at www.kv.com > Resource Library
Knape & Vogt reserves the right to change product specifications at any time without notice and without incurring responsibility
for existing units. This information conforms to editorial style prescribed by The Construction Specifications Institute.
©2016 Knape & Vogt. KV and the KV logo are trademarks of Knape & Vogt.
BHMA
Knape & Vogt shelving products follow the
ANSI testing standards established by BHMA.
2700OakIndustrialDr.NE
GrandRapids,MI49505-6026USA
1.800.253.1561 | 616.459.3311
Fax:877.636.3290
www.kv.com