Specification Sheet

NOTE: 8450FM/8455FM track members are not interchangeable with
previous version 8450/8455 track members.
1/2” Min.
12.7mm
Minus 1.00” to 1.062”
(25.4 to 27mm)
1-1/8”
(29mm)
1” (25.4mm)
8450FM/8455FM TECHNICAL INFORMATION
CABINET MEMBER DIMENSIONS
INSTALLATION
APPLICATION
SPECIFICATIONS
DRAWER MEMBER DIMENSIONS
Knape & Vogt
®
, 2700 Oak Industrial Drive NE, Grand Rapids, MI USA 49505 | P 616.459.3311 | 800.253.1561 | F 616.459.3290 | www.kv.com
©2011 Knape & Vogt. KV and the KV logo are trademarks of Knape & Vogt. Printed in U.S.A. OL2275/1111
28"
26"
24"
22"
20"
18"
16"
14"
12"
1"
[25.4mm]
1-3/8"
[35mm]
1-1/4"
[32mm]
1-1/4"
[32mm]
2-1/2"
[64mm]
3-3/4"
[96mm]
1-1/4"
[32mm]
8455FM
8450FM
28"
26"
24"
22"
20"
18"
16"
14"
12"
7/16"
[11mm]
1-3/8"
[35mm]
1/2"
[13mm]
3-3/4"
[96mm]
1-1/4"
[32mm]
1-1/4"
[32mm]
2-1/2"
[64mm]
3-3/4"
[96mm]
8455FM
8450FM
Designed for applications in the 100-Pound/90-Pound class with drawer
boxwidthsupto24".ConsultKVforverificationtestingserviceofyour
specific application.
Like all KV drawer slides, 8450FM/8455FM Drawer Slides are designed
to meet or exceed ANSI performance standards as established by
KCMA,BHMA,andBIFMAandarebackedbyaLimitedLifetime
Warranty. Knape and Vogt reserves the right to change product
specifications at any time without notice and without incurring
responsibility for existing units.
8450FM Full Extension* Soft-Close Stocking Sku's
Bulk Pack** Poly Pack***
Size Anochrome (ANO) Ebony Black (EB) Anochrome (ANO)
12"* 8450FMB 12 – 8450FMP 12
14" 8450FMB 14 – 8450FMP 14
16" 8450FMB 16 8450FMB EB 16 8450FMP 16
18" 8450FMB 18 8450FMB EB 18 8450FMP 18
20" 8450FMB 20 8450FMB EB 20 8450FMP 20
22" 8450FMB 22 8450FMB EB 22 8450FMP 22
24" 8450FMB 24 – 8450FMP 24
26" 8450FMB 26 – 8450FMP 26
28" 8450FMB 28 – 8450FMP 28
*Note: 12" Slide extension is 10.2"
8455FM 1" Overtravel Soft-Close Stocking Sku's
Bulk Pack** Poly Pack***
Size Anochrome (ANO) Ebony Black (EB) Anochrome (ANO)
16" 8455FMB 16 8455FMB EB 16 8455FMP 16
18" 8455FMB 18 8455FMB EB 18 8455FMP 18
20" 8455FMB 20 8455FMB EB 20 8455FMP 20
22" 8455FMB 22 8455FMB EB 22 8455FMP 22
24" 8455FMB 24 – 8455FMP 24
26" 8455FMB 26 – 8455FMP 26
28" 8455FMB 28 – 8455FMP 28
** Bulk Pack: 10 sets/carton, no screws, one set of instructions.
*** Poly Pack: One set with screws and instructions in poly bag.
10 sets/carton.
Features • Soft-Closemodulewith
Force Management
TM
technology
  • Telescopicactiononprecisionsteelballbearings
  • 32mm hole pattern with direct access mounting
and adjustment
• Lever disconnect for easy drawer removal
• Ballretainerlatchandrampsforeasydrawerinsertion
  • Drawer adjustment without removal
  • Metal ball retainer holds three bearing per inch
of race for smooth and quiet motion
  • Polymer stop cushions, non-handed design
Clearance 1/2", plus 1/32" minus 0" each side
Height 1-13/16"
Load Rating 8450FM:100-PoundClass
8455FM:90-PoundClass
Mounting Side mounting for frame and frameless construction
Max. Width 24" (drawer)
Accessories 8403 Rear Mounting Bracket (Zinc). Non-handed
snap-on design, 2-3/4" maximum adjustment.
8404 Front Face Frame Bracket (Black or Zinc). Non-
handed snap-on design; fits all KV 8400 series products.