Specification Sheet
SALICE HINGE KIT TECHNICAL INFORMATION
FRAMELESS APPLICATIONS - 8071 SETUP
FACE-FRAME APPLICATIONS - 8071 SETUP
HINGE SETUP CHART
Knape & Vogt
®
2700 Oak Industrial Drive NE, Grand Rapids, MI USA 49505 | P 616.459.3311 | 800.253.1561 | F 616.459.3290 | www.kv.com
©2013 Knape & Vogt. KV and the KV logo are trademarks of Knape & Vogt. Printed in U.S.A. OL2127/0813
Knape & Vogt reserves the right to change product specifications at any time without notice and without incurring responsibility for existing units.
Hinge Options Hinge Description Door Thickness
Edge Bore Distance
(DBE)
Hinge Cup Bore Dia.
Maximum Slide Width Including Hinge
for Partition Installations
Partial Overlay
8080 HKS SAL
8080 HKS SAL EB
Standard Hinge 3/4"
[19mm]
17/64"
[7mm]
1-3/8"
[35mm]
1-21/32"
[42.1mm]
N/A
8080 HKF SAL Standard Hinge w/ Free Swing
Knuckle
3/4"
[19mm]
17/64"
[7mm]
1-3/8"
[35mm]
1-21/32"
[42.1mm]
N/A
8080 HKL SAL
8080 HKL SAL EB
Partial Overlay Door 3/4"
[19mm]
19/32"
[15mm]
1-37/64"
[40mm]
1-7/8"
[47.6mm]
3/8"
[9.5mm]
8086 HKX SAL
8086 HKX SAL EB
Extra-Thick Door 1" to 1-1/4"
[25.4mm to 32mm]
33/64"
[13mm]
1-37/64"
[40mm]
2-5/16"
[58.7mm]
N/A
Standard or Free Swing Inset
Frameless, inset application with 3/4" thick door
• 8080 HKS SAL EB (Black)
• 8080 HKS SAL (NP)
• 8080 HKF SAL (NP)
Thick and Extra-thick Inset
Frameless, inset application with 1" to 1-1/4" thick door
• 8080 HKX SAL EB (Black)
• 8086 HKF SAL (NP)
Standard Inset
Face-frame application with 3/4" thick door
• 8080 HKS SAL EB (Black)
• 8086 HKS SAL (NP)
Partial Overlay
Face-frame application with 3/4" thick door
Maximum overlay with full hinge adjustment is 3/8"
• 8080 HKL SAL EB (Black)
• 8086 HKF SAL (NP)
Partial Overlay
Frameless application with 3/4" thick door
Maximum overlay with full hinge adjustment is 3/8"
• 8080 HKL SAL EB (Black)
• 8080 HKL SAL (NP)