Manualshelf

Specification Sheet

ManualsBrandsKnape and Vogt ManualsCabinet Hardware4450 Series 10 Inch Full Extension Side Mount Ball Bearing Drawer Slide with 65 Lbs. Weight Capacity - Pair
12
Light-Duty
65 lb. Load Class
1/2" Side Clearance
Max. Drawer Width: 24"
4450 Full Extension Soft-Close
Low Profile Drawer Slide
The 4450 Full Extension Soft-Close Low Profile Drawer Slide is designed to accommodate
lighter and shallower low height drawers for home and commercial applications.
Applications
• Wood residential and commercial furniture
• Lighter weight applications
• Short drawer height applications
Specifications
Model: 4450 Full Extension Soft-Close Low Profile Drawer Slide
Module: Soft-Close
Mounting: Side
Disconnect: Lever
Hole Pattern: 32mm and Traditional
Face Frame Mounting: Yes
Type: Ball-Bearing
Travel: Full Extension
Finish: Zinc Plated
Length: 12", 14", 16", 18", 20", 22", 24"
Clearance: .50" + .03"-0" on each side
Height: 1.42" [36mm]
Packaging: Bulk Pack (4450B): all sizes - 10 pair per carton
Action: Telescopic
Slide Configuration: Unhanded
Rating
Load: 65 lb.
Max. Drawer Width: 24"
As with all Knape & Vogt drawer slides, the 4450 is designed to meet or exceed
ANSI performance standards as established by BIFMA, BHMA and KCMA.
Accessories
4101B: Rear Mounting Bracket
4104B: Front Face Frame Bracket
Hardware
#7 x 1/2" Phillips Pan Head
Warranty
Limited Lifetime Warranty
Profile Clearance
1/2" + 1/32"-0"
.50" + .03" - 0"
12.7mm + .8mm - 0mm
.50"
[12.7mm]
1.42"
[36mm]

Summary of content (2 pages)