Specification Sheet
Light-Duty
50 lb. Load Class
Max. Drawer Width: 18"
1175 3/4 Extension Center
Undermount Slide
The value-priced 1175 Light-Duty Center Undermount Drawer Slide is easy to install and replace.
Applications
• Kitchen and Bath Cabinets
• Millwork
• Light-Duty Undermount Applications
Specifications
Model: 1175 3/4 Extension Center Under Drawer Slide
Mounting: Under-drawer
Disconnect: Lift Out
Hole Pattern: Traditional
Face Frame Mounting: No
Type: Roller
Travel: 3/4 Extension
Finish: Zinc
Length: 22-5/8"
Height: 1.0" [25.4mm]
Packaging: Poly Pack: 10 slides per carton
Slide Configuration: Unhanded
Rating
Load: 50 lb.
Max. Drawer Width: 18"
As with all Knape & Vogt drawer slides, the 1175 is designed to meet or exceed
ANSI performance standards as established by BIFMA, BHMA and KCMA.
Hardware
#6 x 1/2 Phillips Flat Head – Slide
Warranty
Limited Lifetime Warranty
2700 Oak Industrial Dr. NE
Grand Rapids, MI 49505-6026 USA
1.800.253.1561 | 616.459.3311
Fax: 877.636.3290
www.kv.com
Knape & Vogt reserves the right to change product specifications at any time without notice and without incurring
responsibility for existing units.
©2020 Knape & Vogt. KV and the KV logo are trademarks of Knape & Vogt. OL2872/0120