Specification Sheet

Cabinet Dimensions
Stock #
Min. Cabinet Opening Minimum Interior Cabinet Dimensions Minimum Cabinet Clearances
Width
O
Width
W
Height
H
Depth
D
Front
F
Back
B
Slide-Out Base Blind Corner Units
BCUS-LR-15-CH 15" [381 mm] 26-11/16" [678 mm] 20-1/4" [514 mm] 22-11/16" [576 mm] 1/4" [6 mm] 1/4" [6 mm]
Pot & Pan Caddy
SPS21-FN 20" [508 mm] 20" [508 mm] 14-3/4" [375 mm] 22-3/4" [578 mm] 1/4" [6 mm] 1/4" [6 mm]
SPS27-FN 26" [660 mm] 26" [660 mm] 14-3/4" [375 mm] 22-3/4" [578 mm] 1/4" [6 mm] 1/4" [6 mm]
Wood & Wire Tray Divider Roll-Outs
TDRO-FNW-6 6" [152 mm] 6" [152 mm] 14-1/2" [368 mm] 22-3/4" [578 mm] 1/4" [6 mm] 1/4" [6 mm]
TDRO-FNW-9 9" [229 mm] 9" [229 mm] 14-1/2" [368 mm] 22-3/4" [578 mm] 1/4" [6 mm] 1/4" [6 mm]
Appliance Lift
HAL-20
Platform Width
+ 1" [25 mm]
Platform Width
+ 2-1/2" [64 mm]
25" [634 mm]
Minimum of 16-1/2" [419 mm]
OR platform depth
1/2" [13 mm] 1/2" [13 mm]
* Minimum Cabinet Opening Width AND Minimum Cabinet Interior Width equals total width of completely assembled unit with all baskets applied, plus 1/2" clearance per side
(1" total clearance for center-mounted units, 1/2" side clearance for side-mounted units). Dimensions shown are recommended minimum cabinet dimensions and clearances.
** Slide-out Base Blind Corner Units and Base Cabinet Organizers require 1/2" side clearance on one side, not both.
Example of Frameless / Euro-Style Cabinet Application
Drawer
Product
Cabinet
Frame
1/2" [13 mm]
(Does not apply to
top-mounted Pantry
Roll-Out units.)
1/4" [6 mm]**
1/4" [6 mm]**
Top View
Product
Front View
W
B
F
O
D
H
2700 Oak Industrial Dr. NE
Grand Rapids, MI 49505-6026 USA
Tel: [phone] | 616.459.3311
Fax: [phone]
www.kv.com
This and other KV literature is available for download at www.kv.com > Resource Library
Knape & Vogt reserves the right to change product specications at any time without notice
and without incurring responsibility for existing units.
©2020 Knape & Vogt. KV and the KV logo are trademarks of Knape & Vogt.
OL2329/0120