Wood & Wire Systems Kitchen Organization
A Complete Solution Knape & Vogt Wood & Wire Organization Systems add a sought-after level of functionality to today’s kitchen, maximizing cabinet organization and making the most of under-counter space. These units mount easily into base cabinets of all sizes to meet a wide range of kitchen storage needs. Gliding effortlessly on durable KV slides, they offer maximum accessibility to cabinet contents while minimizing bending and reaching into under-counter spaces.
Pull-Out Systems Slide-Out Base Blind Corner Unit • • • • • Chrome finish Provides easy access to hard-to-reach blind corners Opens by manually pulling each half of the unit out of cabinet in three easy steps Heavy-duty precision ball-bearing slides Unit can install left or right Includes four adjustable chrome and birch veneer base baskets (11-1/4" wide x 17-3/4" deep) 25-1/2" 17-7/8" BCUS-LR-15-CH 20-1/2" 11" Blind portion of the cabinet is on the LEFT Position 1 (closed) Position 3 Cabinet door i
Pull-Out Systems Pot & Pan Caddy • Two separate pull-out sections provide flexible pot and pan storage and access • Pre-finished Birch veneer platforms with contoured skirting and heavy-gauge wire fencing • Easy installation with only four screws 19-1/2" 22-1/4" SPS27-FN (Top and bottom extended) 14-1/4" SPS21-FN (Single cabinet. Top shelf extended.) SPS21-FN 19-1/2" SPS21-FN (Single cabinet. Bottom shelf extended.) See pages 10–11 for recommended cabinet dimensions and clearances.
Pull-Out Systems Wood & Wire Tray Divider Roll-Outs • Heavy gauge wire frames • Birch veneer base platform • Slides out on heavy-duty, full-extension ball-bearing slides Tray Divider Roll-Out (TDRO-FNW-9 shown) 8-1/2" 14" Birch veneer base platform 22-1/4" TDRO-FNW-9 8-1/2" See pages 10–11 for recommended cabinet dimensions and clearances. Customer Service: 1.800.253.
Pull-Out Systems Appliance Lift • • • • Kitchen appliances raise effortlessly with a gas cylinder assist and then lock securely into place Use Appliance Lift to assist in the raising and lowering of unit Can be outfitted with a custom block platform or a quality KV pre-made maple wood platform Lift can be positioned at two different levels: flush with counter or 2" below counter 18" Platform -1) or WAL16.5 (WAL13.5-1 1-1/2" 13-1/2" or 16-1/2" HAL-20 with WAL13.
Product Dimensions Stock # Sliding Assembly Width Assembled Product Dimensions Height Width Depth 20-1/2" [521 mm] 25-1/2" [648 mm] 17-7/8" [455 mm] Finish Units per Carton Weight per Carton SLIDE-OUT BASE BLIND CORNER UNITS BCUS-LR-15-CH 11" [280 mm] Assembled Product Dimensions Chrome/Wood Sliding Assembly Width Width Height Depth Finish [Wire/Platform] SPS21-FN 19-1/2" [495 mm] 19-1/2" [495 mm] 14-1/4" [362 mm] 22-1/4" [565 mm] SPS27-FN 25-1/2" [648 mm] 25-1/2" [648 mm] 14-1/4
Example of Frameless / Euro-Style Cabinet Application W Drawer B Front View Product 1/2" [13 mm] (Does not apply to top-mounted Pantry Roll-Out units.) D H Product Cabinet Frame Top View F O 1/4" [6 mm]** 1/4" [6 mm]** ** Slide-out Base Blind Corner Units and Base Cabinet Organizers require 1/2" side clearance on one side, not both.
