Installation Guide
Page 6
ENGLISH
II.Wire Harness Routing
a. The TV Power cord should be routed through the grommet, and
over to the Power Crew in the middle section of the box. Cable
ties have been included in the Bolt kit to help keep the cables and
cords organized and out of the way. Couple the wiring harness to
the TV cord as shown. This will help
keep the wiring harness from getting
in the way. (SEE FIG. 7)
III. Installing Strap
a. A Strap has been provided to secure
the Power Supply, Simply route the
strap through the slots in the middle section of the unit, and pull
until snug. (SEE FIGURES 8, 9 and 10)
Notice: Any modication or unintended use of this product shall
immediately void all manufacturer’s warranties. Manufacturer
disclaims all liability for injuries to persons or property resulting
from any modications to, or unintended use of this product.
Cable Ties
Wiring Harness
Power Cord
Grommet