Installation Guide

Data Vault
USER INSTRUCTIONS
Page 5
ENGLISH
c. Once screen has been mounted to the
brackets, attach HDMI (2) and VGA(1)
cables to the back of the screen (FIG.3).
d. Plug screen and fan power cords into
extension cord (SEE FIG. 4). Route
extension cord through cord pass
through in back of enclosure. After
enclosure installation, route extension
cord through cable channel at rear of
the 118 to the central compartment
and plug into power strip. Switch on
powerstrip may be turned on and off to
control fan and screen power.
e. Place screen onto the channel inside
the enclosure. The channel has been
pre-punched to accept all standard
vesa mounting dimensions. Engage
brackets with brackets mating to the
slots on the channel. (SEE FIGURES
5 AND 6)
f. Replace the window using the four
screws and washers originally removed,
along with four more provided inside
the bolt kit. Be careful not to overtighten
the screws.