Installation Guide
Page 4
ENGLISH
CAUTION
Any modication or unintended use of this product shall immediately
void all manufactures warranties. Manufacture disclaims all liability
for injuries to persons or property resulting from any modication to,
or unintended use of this product.
CAUTION
Prior to drilling to keep debris out of your eyes, always wear protective
eye wear. Failure to head may result to death or serious injury.
I. Installing A Large Screen
a. Using the 5/16” socket remove the four
#10-24 x 3/4” Hex head screws. Holding
the acrylic window in place, Set window
aside being careful not to scratch it.
(SEE FIG. 1)
b. Place screen to be installed face down
on a at surface. Install the two screen
mounting brackets (SEE FIG. 2) to the
back of the screen. Four M4, four M6,
and four M8 bolts are provided to bolt the
brackets to the screen. In the case that the
back of the screen is not at, spacers have
been provided to create a at surface. Also,
the depth of TV mounting holes varies by
model. Use spacers to shim brackets as
necessary to prevent bolts from bottoming
out. Place spacers as needed between the
screen and the mounting bracket. (FIG. 2)
ROUND HOLES
TO BE MOUNTED
ON THE TOP OF
THE SCREEN