User's Manual

Document NO. Revision NO. 0.1 Page 2 / 4
Project Code Revised Date 2013-09-30 Prepared by S.J Byun
Project Name K-LCS [NODE ] Checked by
Subject Manual Approved by S.Seok
1. General Description
K-LCS [Node] is a specification for a suite of high level communication protocols using small, low-power digital
radios based on an IEEE 802 standard for personal area networks. K-LCS [Node] is often used in mesh
network form to transmit data over longer distances, passing data through intermediate devices to reach more
distant ones. This allows K-LCS [Node] networks to be formed ad-hoc, with no centralized control or high-
power transmitter/receiver able to reach all of the devices. Any K-LCS [Node] can be tasked with running the
network.
K-LCS [Node] is targeted at applications that require a low data rate, long battery life, and secure networking.
K-LCS [Node] has a defined rate of 250 kbit/s, best suited for periodic or intermittent data or a single signal
transmission from a sensor or input device. Applications include wireless light switches, electrical meters with
in-home-displays, traffic management systems, and other consumer and industrial equipment that requires
short-range wireless transfer of data at relatively low rates. The technology defined by the K-LCS [Node]
specification is intended to be simpler and less expensive than other WPANs, such as Bluetooth.
1.1 Features
 IEEE 802.15.4 Standard Compatible Wireless Networking
 Dimming (1 – 10 V), dimming range (10% ~ 100)
 Power on/off
 Power consumption, Current detection, Voltage detection
 Data report (voltage/Current)
 Power Consumption : < 2.5W
 Independent RTC IC
 Remote program update / Hardware Reset
 Compact design 30mm × 40mm × 4.8mm
 Distance Outdoor: approx. 100m
1.2 Applications
 BEMS Applications
 Street Lamp Applications
 High-bay Lamp Applications
 Parking Lamp Application