User's Manual

!
Installation Guide
SPES2
IT Converged LED Lighting
KMW INC.
183-6, Yeongcheon-ro, Dongtan-myeon, Hwaseong-si, Gyeonggi-do, South Korea
Tel : [phone] / E-Mail : [e-mail] / Homepage : www.gigateraled.com
!
Installation Instruction!
5

6

Install the caps of the AC power line and LAN cable glands.
*Do not connect the WAN cable when installing the slave SPES.
Refer to the wiring diagram A and B to wire the AC power line
And the LAN cables.
*Do not connect the WAN cable when installing the slave SPES.
7

8

After wiring, close the base cover and fix it using the latch and 
latch-fixing bolts.
When closing the cover,
make sure that no wire is crushed at the joint.
After connecting the SPES2 with the light pole,
fix the pole clamp and close the pole cover.
!
!