User's Manual

The information in this document is subject to change without notice

Document Revision V0.61 2013.01.11

Pages

Street Light (HR) Installation & Operation User Guide

Open the SMPS part and hang it on the hook before

you start wiring.

Insert the AC power cable behind the arm like the fol-

lowing gure:

HR Model basically does not supply the AC power

cable. If necessary, it shall be purchased by the user.

Once the AC power cable moved inside the lamp,

tension it with a margin for later connection with the

twister.

STEP. 13

STEP. 14

STEP. 15

AC Power Cable Wiring