User's Manual

Document NO.
KMWI-A61-E199
KMWI-A61-E202
Revision NO.
P1.0
Page
6 / 13
Project Code
L15LT028Z
Revised Date
2016.11.21
Written by
Project Name
Dongle PL
Checked by
Subject
Dongle PL Manual
Approved by
KN-연-062 (13.10.18)-0 Company Confidential
< PC’s IP >
2-3. Execute IQsignal for Zigbee. And Setting Parameter as under figure.
< IQsignal for Zigbee Program Parameter Setting >
2-4. Connect USB to Serial Cable to Z_Deg port(J2).
3. TX Test
3-1. Connect IQ NXN's RF1 channel to RF output(MCX) using the RF Cable.
<Connect RF1 to Node’s MCX Connecter >
- Execute Tera Term
- Setting serial port as under figure.
- : The Top bar ‘Setup’ -> ‘Serial Port ...’ selection