User's Manual

Document NO.
KMWI-A61-E199
KMWI-A61-E202
Revision NO.
P1.0
Page
4 / 13
Project Code
L15LT028Z
Revised Date
2016.11.21
Written by
Project Name
Dongle PL
Checked by
Subject
Dongle PL Manual
Approved by
KN-연-062 (13.10.18)-0 Company Confidential
1. Dongle-PL Test using the Power Supply
1-1. Dongle-PL Test using the Power Supply
- Dongle PL Board is powered by a Power Supply. current consumption check using the
Power Supply
- Power Supply settings DC15V, 1A
- Dongle-PLs average power consumption is under 0.3W. Current consumption 15~25mA @
15V
1-2. Change into ISP mode.
1-3. Connect Debug Cable to Z_Deg port(J2). (Use Pogo Pin)
1-4. Execute Device-Programmer MD 2.60 Program.
< Device-Programmer MD 2.60 Execution screen >
1-5. Select the MG2450/2455.
< Device-Programmer's Device Setting>