User's Manual

Document NO.
KMWI-A61-E199
KMWI-A61-E202
Revision NO.
P1.0
Page
10 / 13
Project Code
L15LT028Z
Revised Date
2016.11.21
Written by
Project Name
Dongle PL
Checked by
Subject
Dongle PL Manual
Approved by
KN-연-062 (13.10.18)-0 Company Confidential
- RX Test
4-1. Execute 'vector signal analyzer' as under figure.
<Execute Vector signal analyzer >
4-2. Connect IQnxn's RF2 Channel to device's output.
<Connect RF 2 port >
4-3. Open the 'zigbee_psdu20.mod' file.
4-4. Execute ‘Tera Term’ And then Setting port. ( 3-2. Reference setting Teraterm)
4-5. Select RF ON/OFF button as under figure, select 'Start' button. then number 1000's Tx
data is transmitted to the Dongle PL Board.