User's Manual

User Manual for POD Systems Revision: 0.7
© KMW USA Inc.
1818 E. Orangethrope Ave, Fullerton, CA 92831
Tel. [phone]
www.kmwcomm.com
11
SAFETY AND REGUALTION WARNING NOTICE
Only qualified personnel should handle the POD equipment. Any person involved in installation or operation
of the POD should understand and follow these safety guidelines.
REGULATION
Obey all general and regional installation and safety regulations to prevent any kinds of safety accidents such
as potential electric shock, or RF exposure while installation, maintenance, or operation.
FCC REGULATION Use of unauthorized antennas, cables, and/or coupling devices not conforming with
ERP/EIRP and/or indoor‐only restrictions is prohibited.
Use of unauthorized antennas, cables, and/or coupling devices not conforming with ERP/EIRP and/or indoor‐
only restrictions is prohibited.
 Use of unauthorized antennas, cables, and/or coupling devices not conforming with ERP/EIRP and/or
indoor‐only restrictions is prohibited.
 FCC Part 15.19 Statements
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
 FCC Part 15.105 statement
- This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
 FCC Part 15.21 statement
- Any changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate this equipment.
 RF Exposure Statement
- The antenna(s) must be installed such that a minimum separation distance of at least 60 cm with 3dBi
antenna gain or 300 cm with 11dBi antenna gain or is maintained between the radiator (antenna) and
all persons at all times. This device must not be co-located or operating in conjunction with any other
antenna or transmitter.
 FCC part 20 Industrial Booster statement (FCC ID: ZUQR7S8CPAWB-2730 & ZUQR-P78-27)
- WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and
QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of FCC Licensee to operate
this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess
of $100,000 for each continuing violation.