Manualshelf

User's Manual Part 2

ManualsBrandsKMW U.S.A. ManualsElectronicsDAS Head-End
31323334353637383940
User Manual for POD Systems Revision: 0.9
89
4.2.1.2 Optic cable connection
- After loosening 4x SECURITY SCREWS (M4), open the door for debug window.
- After loosening 5x SECURITY SCREWS (M4), open front door.
- After taking out of gasket from optic cable entrance located in left side, pass optic cable through this
entrance.
- Connect optic cable to optic port located on the left top side in debug window.
- Replace gasket into optic cable entrance.
- Continue in section 4.2.1.3.