User's Manual Part 2

User Manual for POD Systems Revision: 0.9
82
4.1.3 Cable Connection for TDD 2.6G frequency band
 POD DAS System configuration
- H-DMCU : 1ea
- H-PSU: 1ea
- H-SRU: 1ea (H-SCM, H-FAU, H-CDU)
- H-FEM: 1ea (FEM-L-B)
- H-COM: 1ea
- H-DTM: 1ea
- H-HOM-L: 4ea
Figure 4-3 shows cable connection example for TDD 2.6G frequency band.
In case of 2.6G supporting TDD system, TDD sync signal generated from H-FEM-L-B should be transferred to RU
to synchronize TDD timing in overall POD DAS system. H-FEM-L-B has 4 TDD sync output port and each TDD sync
port is connected to TS sync port of H-HOM-L to transfer TDD signal over optic cable.
Figure 4-3 Cable Connection Example #1 for TDD 2.6G frequency band