User Manual

The wireless remote control must be connected before using the projector.

After turning on the projector, press and hold the volume(-)key and volume(+)key for 3

seconds within 1 meter from the projector.

When pressed, the indicator on the remote control ﬂashes and a sound bar appears on

the main screen.

1) USB

In the case of a USB/TF storage device with a built-in automatic recognition program or

using its own driver, it may not work.

Some USB/TF storage devices may not work or operate smoothly.

If a USB extension cable is used, it may not work or may not operate smoothly.

Use only FAT32 formatted USB/TF storage devices provided by Windows.

For an external USB hard disk, use a device with a rated voltage of 5 V and a rated

current of 500 mA or less.

It is recommended to use a hard disk with power supply. (If the power is insuﬃcient, the

USB device may not be recognized properly.)

USB/TF capacity of 32GB is recognized as standard, but 128GB may also recognized.

Data on the USB storage device maybe damaged, so back up the important ﬁles.

User should responsible for the data, the manufacturer isn’t responsible for the data.

Multi-port is also available for USB port.

Some apps do not support mouse wheel.

Remote

External Device Connection

Home

Indicator

Power ON/OFF or

bluetooth speaker switch

Mouse Function

Return

Volume Adjustment

Up/Down/Left/Right

Go to menu item and select

AAA Battery

INNOmovie Portable Beam Projector_Manual

Inner Page - 07