User Manual

※
The adapter is subject to change without notice for quality improvement.
[ Notice ]
1) The picture may differ from the actual product. Various accessories are subject to cha-
nge without notice to improve product quality. New accessories may be added or deleted.
2)Due to the nature of the beam projector, the top and bottom edges of the screen may
be blurred. This is due to the nature of the optical engine, and it is not a product malfun-
ction. The proper throw distance is 100cm~200cm.
* The longer the projection distance, the more blurred the screen.
3) Install the projector so that it is perpendicular to the projection screen. If the image is
distorted or curved, please check if the projector is installed properly by installing it on a
level surface.
4) The projector can be installed using a camera tripod. When fixing the tripod, the length
of the fastening bolt is recommended to use the international standard of 4.5mm or less.
The allowable length of the fastening bolt is 5.5mm maximum. Anything longer may dam-
age the projector.
Be careful when using a tripod as external force may cause the projector to topple over
and cause damage.
Do not install the tripod on an unstable place.
구성품
Remote Adapter Tripod
User ManualINNOmovie
User Manual Book
Conponents
INNOmovie Portable Beam Projector_Manual
Inner Page - 04