User Manual

1. Be careful not to tip over or drop the projector when connecting an external device.
It may cause injury or product damage.
2. Do not place the product near sunlight, candles, heat sources (stoves, microwaves).
(It may deform the product or cause an explosion or fire.)
3. Do not look directly into the light of the projected lens or project it into your eyes.
(Projected light may be harmful to your eyes,)
4. Do not install on a wall or ceiling where oil or oil vapor may come in contact.
The product may be damaged and fall.
5. Do not replace the lamp or other electrical parts without unplugging projector.
6. Do not apply shock to the product, don’t place it where there is vibration or magnets.
Please stay away. (It may cause product failure.)
7. In case of smoke or strange noise or smell, stop using it immediately and contact
your distributor.
8. If the product is disassembled or remodeled arbitrarily, even if it is in the warranty,
you should afford the repairing costs.
9. Unplug the adapter from the AC, you can’t use the projector for a long time.
10. We are not responsible for the damage or defects caused by user negligence.
All repairs are professional if you ask a technician.
11. Fan noise is not a defect of the product.
12. Do not allow pets to suck or bite this product.
(It may damage the product or cause an explosion.)
* This device is a business (Class A) electromagnetic wave compliant device,
so sellers or users should be aware of this.
Frequently Asked Questions Please read the following procautions before using
the projector.
Safety Instructions
INNOmovie Portable Beam Projector_Manual
Inner Page - 03