Instructions

Step1.
The sound bar needs to be in “LINE IN” mode, you can operate with the KMOUK remote control
or the “SOURCE” button on the sound bar to switch.
Step2.
Plug the 3.5mm audio cable or 3.5mm to RCA cable into the soundbar 3.5mm audio hole on the
sound bar, the other end plugged into the TV audio interface. (Please make sure that the TV
interface must be the output port OUT.)
Step3.
Turn on the TV ---> Settings ---> Sound Settings ---> Sound output select headphones or speakers
---> Exit.
The instruction will be also attached. We would be very happy to know if you connect the
soundbar correctly.