Instructions

+ button: Click the volume + button to increase the volume.
- button: Click the volume- button to decrease the volume.
Power button: Press and hold the power button for 1.5 seconds to turn off.
2) If you operate the button correctly according to the above methods, the
touch button still not work, please check whether you have pressed the other
buttons at the same time, because which may cause command errors and
inability.
3) If it still doesn’t work, please restore the soundbar to factory settings, then
repeat the above operations.(Power on the soundbar, switch to Bluetooth mode,
then press and hold the Power button and M button simultaneously for 5
seconds to restore the factory settings)
7. Why there is noise or static noise and how should I deal with it?
1) When using Bluetooth connection, please unplug the OPT or AUX cable.
2) Please tear off the label on foot pad at bottom of soundbar before use.
3) Try to use other device. If the problem can be solved, it means that the output
device is abnormal and causes noise.
8. Why there is no sound?
1) Make sure the power supply is connected.
2) Increase the volume of connected device first, and then operate soundbar.
3) Try to press the mute button on remote control, you may have touched the