User's Guide

.
•Electronic
devices may cause radio interference. Devices that gene
r-
at
e electromagnetic waves must be kept away from the
Soundbar
main
unit - e.g., microwaves, wireless LAN devices, etc.
7
. USE YOUR SYSTEM
Y
ou can use your Soundbar with the control panel or remote
control
an
d adjust the sound effect or select the audio source.
Operation
s of the control panel
Button Operation LED Indicator
V
oic
e Prompt
Power
Single press
（
Power on）
Indicates
channels and
sound
modes
/
Long press 1.
5 seconds
(Power off)
/
Source
Click to switch audio
source
The
LED ligh
t corresponding
to
the audio source lights up
/
V
olume
＋
Press or hold to add
volume
The
LED displays the
volume.
Maximum volume
is
30
, Return to the current
channel
after 3s.
/
V
olume-
Press or hold to
reduce
volume
The
LED displays the
volume.
Minimum volume is
0
, Return to the current
channel
after 3s.
/
NOTES:
1.
Press the " " button to shut down and start up again, keeping
the
settings
before the last shutdown.
2.
After power on, the volume of each mode has memory function,
and
cannot
interfere with each other.
3.
After power off and reboot, the volume will return to the
default
value
of 67% and other settings will remain the state before
shutdown