User's Guide

TICAL
2.
Plug the one terminal of OPTICAL cable into the soundbar
OPTI-
CA
L port and another into TV OPTICAL port .
3.
Turn on the soundbar.
4.
Press the "OPT" button on the remote or press the "SOURCE"
butto
n on the soundbar to enter OPTICAL mode.
5.
Set up your TV as the following steps: Setting-Sound-Output-OPT
I-
CAL
-Digital output-PCM
6.
Using the native controls on your connected device, make sure
the
audi
o settings are set to OPTICAL Audio and are turned on.
7.
Audio from the connected audio source will be played through
the
speakers.
HDMI(AR
C)
AUX IN OP
OPTICAL IN
OPTICAL IN OPTICAL (Supplied
） OPTICAL OUT
TV PCM
OPTICAL OUT
NOTE
: Confirm to set your TV or other device audio settings
to support
“external speakers” and disable the built-in TV speakers.
Connec
t with the supplied 3.5mm AUX cable
1.
Plug the one terminal of 3.5 mm AUX cable into the soundbar
AUX
por
t and another into TV audio output port .
2.
Turn on the soundbar.
3.
Press the "AUX" button on the remote or press the "SOURCE
"
butto
n on the soundbar to enter AUX mode.