Product Overview

ManualsBrandsKMC Controls ManualsDampersE/I-P Transducer

1

Table Of Contents

© 2013 KMC Controls, Inc. 871-035-01E

KMC Controls, Inc.

19476 Industrial Drive, New Paris, IN 46553

574.831.5250

www.kmccontrols.com

info@kmccontrols.com

Supply Voltage 24 VAC (+20%/–15%), Class 2

only, 1 VA;

or 24 VDC (+66%/–8%), 50 mA

Input Signals 1 to 5 VDC, 2 to 10 VDC, or

4 to 20 mA

Input Resistance

1 to 5 VDC 100K ohms

2 to 10 VDC 200K ohms

4 to 20 mA 250 ohms

Output Signal 3 to 15 psi (21 to 103 kPa)

Output Capacity 200 scim (55 mL/s)

Main Air

Supply 20 psi nominal (138 kPa)

30 psi maximum (207 kPa)

Consumption 28.8 scim (7.9 mL/s) @ 20 psi

supply (138 kPa)

Manual Override Jumper selectable with po-

tentiometer adj. for 3 to 15 psi

output (XEC-3004 only)

Mounting 2.75" (70 mm) section of 3.25"

(83 mm) Snap Track supplied

for panel mounting and will

t2.75"(70mm)SnapTrack

for horizontal mounting (posi-

tion insensitive)

Material

Plastic Glass-llednylon,ABS

Diaphragms Neoprene

Weight 5.5 ounces (155 grams)

Operating Characteristics

Linearity 1% full scale

Hysteresis & repeatability 0.75% full scale

Connections

Wiring Screw terminals for 14–22

AWG, copper

Air 3/16" (5 mm) nipple for 1/4"

(6 mm) OD polyethylene tub-

ing. 1/8" (3 mm) female NPT

for branch pres sure gauge

Temperature Limits

Operating 40 to 120° F (4 to 49° C)

Shipping –40 to 140° F (–40 to 60° C)

Humidity Non-condensing

Speciﬁcations Dimensions and Connectors

All dimensions are in inches (mm).

CAUTION

Pneumatic devices must be supplied with clean, dry

control air. Any other medium (e.g., oil or moisture

contamination) will cause the device to fail.