User Guide
VEB-46/VEP-43 Series 3-Way, NPT, Control Ball Valves (1⁄2 to 21⁄2") 2 Installation Guide© 2013 KMC Controls, Inc. 050-019-51G
KMC Controls, Inc.
19476 Industrial Drive
New Paris, IN 46553
574.831.5250
www.kmccontrols.com
info@kmccontrols.com
For additional instructions on wiring, feedback selec-
tor, and actuator/signal range reset (auto-mapping),
see the MEP-4000/4800 Series Installation Guide or
(fail-safe) MEP-4200/4500/4900 Series Installation
Guide.
More Information
For non-fail-safe wiring,
auxiliary switches, feed-
back/direction selectors,
actuator/signal range reset
(auto-mapping), and other
information, see the MEP-
4000/4800 Series Installa-
tion Guide.
Formodels,specications,
and additional information,
see the VEB-46/VFB-46
Series Data Sheet on the
KMC web site.
CL Wiring (MEP-4x52)
–
–
–
~/+
+
Control Signal
2–10 VDC
Power Supply
24 VAC/VDC
OUT (Green)
2–10 IN (White)
T
COM (Black)
~24 V (Red)
+
Feedback Output
1–5 or 2–10 VDC
For information on assem-
bling a quick-mount “V”
actuator on a valve body, see
the HPO-5074 Installation
Guide.
For fail-safe wiring,
auxiliary switches, feed-
back/direction selectors,
actuator/signal range
reset (auto-mapping), and
other information, see the
MEP-4200/4500/4900 Series
Installation Guide.
Wiring
NOTE: The installed actuator model is indicated
by the last two digits of the VEB valve
model number (e.g., VEB-46xxxxCK
has an MEP-4002V actuator) and the
last three digits of the older VEP valve
model number (e.g., VEP-43xxx745 has an
MEP-4002 actuator). For wiring and other
information about tri-state and other
actuators no longer sold mounted on
these valves, see the respective actuator’s
installation guide on the KMC web site.
CK/745 Wiring (MEP-4002)
NOTE: Before January 2014, MEP-40x2/48x2
models had 0–10 VDC inputs. They now
have 2–10 VDC inputs. When replacing an
older 0–10 VDC actuator with a 2–10 VDC
actuator,conguretheconnectedcontroller
or thermostat output to match.
Power
Supply
~
–
–
+
Control Signal
2–10 VDC
–
+
Feedback Output
1–5 or 2–10 VDC