Product Overview

Specifications and design subject to change without notice.
Dual Duct
Secondary Actuator
Description
The TSP-8001 is a secondary actuator for SimplyVAV
dual-duct installations. The actuator connects
directly to a BAC-8007 SimplyVAV controller for
easy installation.
 Integrated airow sensor
 No set up required. All programing and
sequences are built into the SimplyVAV
BAC-8007 dual duct primary controller.
 All inputs and outputs for SimplyVAV
controllers are set up at the factory. No eld
programming required.
Specifications
Inputs and outputs
All inputs and outputs connect directly to a
BAC-8007 SimplyVAV controller. Connections are
made with screw terminals that accept wire size
12-16 AWG.
Air flow sensor features
CMOS dierential pressure 0-2 inches of water
(0-500 Pa) measurement range. Internally linearized
and temperature compensated.
 Congured as BACnet analog input object.
 Span accuracy 4.5% of reading.
 Zero point accuracy 0.0008 in. H2O/0.2 Pa at
25° C
 Barbed connections for 1/4 inch FR tubing.
Actuator features
Torque 40 in-lb. (4.5 N•m)
Angular Rotation 0 to 95°
Adjustable end stops
at 45 and 60° rotation
Motor Timing 90 sec./90°at 60 Hz
Shaft size
Directly mounts on 3/8 to 5/8 inch (9.5 to 16 mm)
round or 3/8 to 7/16 inch (9.5 to 11 mm) square
damper shas.
Installation
Supply voltage 24 volts AC (–15%, +20%),
50-60 Hz, 5 VA,
Class 2 only
Weight 13.2 ounces (376 grams)
Case material Gray and black ame
retardant plastic
Environmental limits
Operating 32 to 120° F (0 to 49° C)
Shipping –40 to 140° F (–40 to 60° C)
Humidity 0-95% relative humidity
(non-condensing)