Install Instructions
Table Of Contents
- Contents
- Section 1: About the controllers
- Section 2: Installing the controllers
- Section 3: Changing the room setpoint
- Section 4: Configuring the controllers
- Section 5: Balancing airflow
- Section 6: Application drawings
- Section 7: Sequences of operation
- Section 8: System integration and networking
- Appendix A: K‑factors
- Index
setting
changeover 23
limits 23
occupied 23
room 19
standby 23
shaft size for actuator 6
specifications 6
standby
sequence 50
setting timer 33
submittal sheets 41
system diagnostic indicators 54
T
three-stage reheat 43
time proportional reheat 45
timers, setting 33
transformer wiring 17
tri-state reheat 46
two-stage reheat 43
U
units to display 35
unoccupied
sequence 50
temperature setpoints 23
V
value objects 68
W
wiring
application drawings 41
connecting power 17
DAT sensor 16
MS/TP network 63
room sensors 15
SimplyVAV
Revision H 75