Install Instructions

Procedure Detailed steps Sensor display
1 Starting display
1. Start at the temperature display.
2.
Press the and buttons together.
l If Password 2 is not required, the display
changes to CNFG.
l If required, enter Password 2. The display
changes to CNFG when Password 2 is correct.
72
12S1
PSW2
OOOO
2 Select the restore settings
display.
1.
From the CNFG display, press the or buttons to
show the CNFG display.
2.
Press the
Set
Point
button to select the CNFG options. The
display changes to STPT.
3.
Press the or buttons to change the display to
RSTR.
Caution: Choosing RSTR deletes all previously
entered values and returns the controller to the
manufacturer's settings. Only the BACnet
communications settings will remain unchanged.
4.
Press the
Set
Point
button to select RSTR.
CNFG
STPT
RSTR
3 Choose the application.
1.
Press the or buttons to choose ENGLISH or
METRIC.
Metric The sensor displays temperature in Celsius
and uses metric values for units of measure.
English The sensor displays temperature in
Fahrenheit and uses English values for units of
measure.
2.
Press the
Set
Point
button to save the entry and advance to
the next function.
METRIC
RSTR
ENGLISH
RSTR
Procedure to restore application
Section 4: Configuring the controllers KMC Controls, Inc.
36 Revision H