Install Instructions
Table Of Contents
- Contents
- Section 1: About the controllers
- Section 2: Installing the controllers
- Section 3: Changing the room setpoint
- Section 4: Configuring the controllers
- Section 5: Balancing airflow
- Section 6: Application drawings
- Section 7: Sequences of operation
- Section 8: System integration and networking
- Appendix A: K‑factors
- Index
Procedure Steps Sensor display
3 Set the active cooling setpoint.
1.
Press the or buttons to change the cooling
setpoint temperature. The setpoint changes in
increments of 0.5 degrees.
2.
Press the
Set
Point
button to save the value.
The display advances to set the heating setpoint.
745
COOLING
4 Set the active heating setpoint.
1.
Press the or buttons to change the heating
setpoint temperature. The setpoint changes in
increments of 0.5 degrees.
2.
Press the
Set
Point
button to save the value.
The display returns to the temperature display.
685
HEATING
Changing room setpoints (continued)
Section 3: Changing the room setpoint KMC Controls, Inc.
20 Revision H