User Guide

2 AG150119E
Handling Precautions
For digital and electronic
sensors, thermostats, and
controllers, take reasonable
precautions to prevent
electrostatic discharges to
the devices when installing,
servicing, or operating them.
Discharge accumulated
static electricity by touching
one’s hand to a securely grounded object before working with each device.
Mounting Plates/Adapters
For mounting to various sizes of electrical boxes or other openings, KMC
Controls sells mounting plates/adapters designed for various models of
sensors.
NOTE: Light almond plates are not for white “W” model sensors.
HMO-10000W White (shown), for mounting BAC-
12xxxx FlexStats (not needed for
BAC-13xxxx/14xxxx models), BAC-
4xxxCW000x AppStats, and STE-9xxx
NetSensors to horizontal 2 x 4 inch
horizontal or 4 x 4 inch electrical boxes
HMO-10000 Light almond
For KMD-116x/118x/12x1 and STE-8x01
HMO-1161 Light almond (shown), for mounting
KMD-116x/118x/12x1 and STE-8x01
NetSensors to 4 x 4 or horizontal 2 x 4
inch electrical boxes
HMO-1161W White
For KMD-1151/1171
HMO-5042 Light almond (shown), for mounting
(discontinued) KMD-1151/1171
NetSensors to 4 x 4 or horizontal 2 x 4
inch electrical boxes
HMO-5043 White
For STE-6xxx and THE-1102
HMO-6036 Light almond (shown), for mounting STE-
6xxx temperature sensors and THE-1102
humidity transmitters with temperature
sensors to 2 x 4 inch electrical boxes
HMO-6036W White
For BAC-12xxxx, BAC-4xxxCW000x, and STE-9xxx